--- title: "ASTM D412 / ISO 37 Rubber Tensile Testing: Guide & Automation | LabsCubed" description: "Automated ASTM D412 testing, explained: what ASTM D412 and ISO 37 measure, dumbbell vs. ring specimens, equipment and extensometers, and how the CubeOne automates rubber tensile testing." url: https://labscubed.com/resources/astm-d412-iso-37-rubber-tensile-testing --- 1. [Home](https://labscubed.com/) 2. [Resources](https://labscubed.com/resources) 3. ASTM D412 / ISO 37 # ASTM D412 Explained: A Complete Guide to Rubber Tensile Testing This guide walks through the ASTM D412 testing process, including specimen preparation, testing equipment, extensometer options, material compatibility, and expected data. Exploring practical examples using the CubeOne workflow, it becomes clear how automation helps streamline the testing process. 11 min read Updated September 10, 2026 [Official Standard](https://store.astm.org/d0412-16.html) ## On this page 01 Overview 02 What it measures 03 When to use it 04 Specimen types 05 Equipment 06 Extensometers 07 Test workflow 08 Repeatability 09 Data & reporting 10 Automating the test 11 FAQ ## How to Follow ASTM D412 for Rubber Tensile Testing ASTM D412 is the widely accepted standard method for determining the tensile properties of rubber and elastomers. Whether you're evaluating materials for product development, regulatory compliance, or quality assurance, understanding and correctly applying these steps ensures accurate, repeatable results. This guide walks through the ASTM D412 testing process, including: - Specimen preparation - Testing equipment - Extensometer options - Material compatibility, and expected data Exploring practical examples using the CubeOne workflow, it becomes clear how automation helps streamline the testing process. The official standard is available from ASTM: [ASTM D412 on astm.org](https://store.astm.org/d0412-16.html). ### Key takeaways - ASTM D412 is the widely accepted standard method for determining the tensile properties of rubber and elastomers; ISO 37 is its international counterpart. - Method A uses dogbone-shaped samples (6 types) and Method B is intended for ring-shaped specimens (2 types). Method A is the more commonly used and is supported by the CubeOne system. - A compliant setup needs controlled test speeds, a load cell suited to low-force high-elongation elastomers, non-slip grips, a compliant strain measurement system, and precision thickness measurement. - Temperature, humidity, and testing speed can affect test results, so these factors should be controlled to ensure accurate results. ## What Does ASTM D412 Measure? ASTM D412 is a standardized test method used to measure the tensile properties of rubber and thermoplastic elastomers under controlled loading. It assesses the material's elasticity, measuring how much it stretches under tension and how much permanent deformation remains after the load is removed. 01 Tensile Strength The maximum tensile stress a material can withstand before breaking. 02 Tensile Stress at a Given Elongation (Modulus) The stress required to stretch the material to a specific strain level or elongation (e.g., 100%, 200%, or 300%). It quantifies the stiffness of the rubber at defined points along the strain curve and is useful for comparing material rigidity. 03 Ultimate Elongation The amount of elongation a material can withstand before failure (elongation at break). 04 Tensile Set The amount of permanent deformation remaining after a material is stretched and allowed to relax, indicating the material’s tendency to deform permanently under stress. 05 Stress-Strain Behavior The stress-strain curve visually depicts how rubber responds to tension, illustrating elasticity, yield points, and, when applicable, fracture behavior. For highly elastic materials, the test may not reach fracture, focusing instead on elongation and recovery characteristics. This data helps engineers, product designers, and quality control specialists assess material performance in applications where rubber undergoes stretching forces. **Note:** While ASTM D412 and ISO 37 use different test speeds and specimen dimensions, they both serve the same purpose: measuring the tensile behaviour of elastomeric materials under controlled conditions. ![CubeGo automated tensile testing machine for R&D labs](https://labscubed.com/assets/img/resources/astm-d412/cube-go-labscubed.webp) ## When Should You Use ASTM D412 or ISO 37? ASTM D412 applies to: - Testing thermoset rubber (e.g. natural rubber, neoprene, nitrile, EPDM) - Testing thermoplastic elastomers (TPEs, TPVs) used in molded parts or flexible components - Measuring material consistency during quality control or batch testing - Validating new rubber compounds in R&D and formulation work - Comparing mechanical performance across suppliers or materials - Ensuring products meet customer, industry, or regulatory requirements ASTM D412 is commonly used in the automotive, aerospace, medical, and other industries to ensure rubber materials meet strength and elongation requirements. It's the primary tensile test method for quality control and product development involving rubbers, especially in North America. The international counterpart, ISO 37, follows a similar approach and is more widely used in Europe and other regions. Both standards are used to evaluate the stress-strain behavior of vulcanized rubber and thermoplastic elastomers. Choosing between standards depends on whether your project or customer follows North American (ASTM) or international (ISO) quality standards. ### CubeOne is designed for labs performing regular tensile testing on elastomers Whether for production control, research, or certification, it's ideal for: Labs needing to test up to 12 samples in a single run Manufacturers looking to reduce operator time and human error Teams focused on improving test repeatability and traceability Any organization currently running ASTM D412 or ISO 37 manually and seeking automation These standards should be your go-to method any time the goal is to understand how rubber will stretch, perform, and ultimately fail under load — and CubeOne ensures you can do that with accuracy, speed, and minimal effort. ## ASTM D412 Specimen Types ASTM D412 outlines two testing procedures based on the specimen shape, and it's important to note that the results from each method may differ. Method A uses dogbone-shaped samples (6 types), while Method B is intended for ring-shaped specimens (2 types). Method A is the more commonly used and is supported by the CubeOne system, as illustrated below. Sample thickness is typically 3 mm (0.12 inches). Note, the thicker the sample, the greater force required to stretch it. ![ASTM D412 - Types A, B, C, D, E, F - Tensile Testing LabsCubed](https://labscubed.com/assets/img/resources/astm-d412/ASTM-D412-Specimen-Types-Tensile-Testing.webp) True relative scale — drawn to one another's real proportions ASTM D412 Die C Standard rubber dog-bone — the most common elastomer die. Overall length 115 mm Narrow width 6 mm Gauge length 25 mm Thickness 1.5–3 mm Use case The industry standard die in North America ### Dogbone vs. ring specimens | | Dogbone Specimens | Ring Specimens | | --- | --- | --- | | Test Method | A | B | | Shape | Narrowed middle (dogbone) | Continuous loop | | Gripping method | Flat jaws | Rollers or mandrels | | Most common use | General tensile testing | Testing of O-rings, gaskets | | Industry standard | Yes (especially Type C in North America.) | Less common but useful for rings | | Stress distribution | High in gauge area | Uniform across the ring | | Notes | Requires die-cutting | Requires a ring mold or a cutting tool | Dogbone samples are typically die-cut from molded sheets or plaques, and the grain direction from the extrusion process can influence results. To maintain consistency, specimens should be cut so that their length runs parallel to this grain. ## Equipment & Testing Environment Requirements A system configured for ASTM D412 or ISO 37 rubber dogbone tensile testing must include: - A tensile frame capable of controlled, standard-compliant test speeds - A calibrated load cell suited for low-force, high-elongation elastomer testing - Grips to securely hold rubber specimens without slippage or deformation - A compliant strain measurement system (physical or video extensometer) - Precision thickness measurement tools for consistent specimen validation CubeOne is purpose-built to meet and exceed these requirements. Its automation eliminates manual setup and ensures repeatable, accurate results on every test. It’s the ideal solution for quality control and R&D labs working with rubber and elastomers. For globally aligned applications, ISO 37 is a commonly used international equivalent to ASTM D412, with slight variations in specimen dimensions and test speeds. CubeOne supports both standards with seamless method selection. ![5-sample tray for automated tensile testing in R&D labs](https://labscubed.com/assets/img/resources/astm-d412/80acba2d069f9161232716441ecbc38a_tray_cube_go_5samples.webp) ## Extensometer Options for ASTM D412 Accurate strain measurement is crucial for rubber tensile testing. CubeOne supports two of the three extensometer technologies, all optimized to meet the accuracy and compliance requirements of ASTM D412 and the equivalent international standard, ISO 37. Not on CubeOne Automated Physical Extensometer Measures strain using physical gauge arms Best for Rigid elastomers where high repeatability and accuracy are needed. On CubeOne Video Extensometer Non-contact optical tracking for strain measurement Best for Delicate samples or high-elongation rubbers. On CubeOne Crosshead Displacement Uses built-in displacement tracking for basic strain measurements Best for General-purpose tests i.e., low/high-elongation rubbers or quick tests. ## How to Perform a Tensile Strength Test on Rubber (ASTM D412 or ISO 37) CubeOne simplifies tensile test process: ![Loading rubber samples into the CubeOne tray for automated tensile testing.](https://labscubed.com/assets/img/resources/astm-d412/step1_cube_one_tray.webp) Step 1 ### Loading your samples Simply load up to 12 rubber samples into the CubeOne tray, even if they come from different compounds or production batches. [Request a Quote or Demo](https://labscubed.com/get-a-quote) ![Starting a tensile test from the LabsCubed touchscreen interface.](https://labscubed.com/assets/img/resources/astm-d412/4-start-tensile-testing-touch-cubeten-astmd638.webp) Step 2 ### Start the Test Launch the ASTM D412 or ISO 37 method from the touchscreen. CubeOne pulls the specimen while recording real-time load, displacement, and strain data. [Request a Quote or Demo](https://labscubed.com/get-a-quote) ![CubeOne running tensile testing on rubber samples.](https://labscubed.com/assets/img/resources/astm-d412/testing_sample_cube_one_tensile.webp) Step 3 ### Measure, Test, Discard the Samples and Repeat. Before testing begins, the system automatically measures thickness using calibrated sensors. The specimen is aligned and clamped using self-centering grips that apply consistent force. No manual adjustments or setup required. [Request a Quote or Demo](https://labscubed.com/get-a-quote) ![CubeOne tensile test results for ASTM D412 shown in the LabsCubed data view.](https://labscubed.com/assets/img/resources/astm-d412/data_cube_one_astm_d412.webp) Step 4 ### Capture and Export Results As each test completes, CubeOne instantly delivers tensile strength, elongation, modulus, and full stress-strain curves. Results are immediately available for review on-screen, in the LabsCubed Portal, or exported to your LIMS, ERP, or QA platform. [Request a Quote or Demo](https://labscubed.com/get-a-quote) This fully automated workflow eliminates operator-dependent variation, speeds up your testing process, and ensures every test is consistent and compliant with ASTM D412 and ISO 37 standards. ## How CubeOne Delivers Repeatable Results ### Where manual setup introduces variability Traditional universal testing machines rely on manual setup, introducing variability through: - Inconsistent specimen alignment - Uneven gauge length marking - Variable grip pressure or technique These small differences can impact strain accuracy, cause slippage, or skew results, even with calibrated equipment. ### How CubeOne removes it CubeOne automates alignment, gripping, and measurement in tensile testing, eliminating sources of human error and producing consistent results: - Automatic sample measurement: Calibrated sensors instantly capture width and thickness, no manual tools required. - Smart vision system: Detects specimen edges, even with varied colors or finishes. - Auto-alignment: Self-centering grips and alignment verification ensure precise positioning every time. ## Data Integration and Reporting with CubeOne All test results can be reviewed, compared, and exported via the LabsCubed Portal, which offers: Interactive Stress-Strain Visualization (A) Real-time overlay of multiple curves for side-by-side comparison, with cursor tracking to inspect individual data points, such as strain, stress, and modulus at key elongations. Batch Testing Reports and Statistical Summaries (B) Automatically calculates mean, median, standard deviation, and coefficient of variation (CoV) for stress, strain, and modulus values across test sets. Specimen-Level Tracking (C) Each test includes timestamped records, operator ID, test speed, and precise specimen dimensions (measured and auto-detected), providing full traceability. Flexible Data Filtering (D) Users can exclude or include specific samples, view slot-level test details, and customize which results are shown in summary calculations. Export Options (E) Results are instantly available for download in CSV or PDF format, or can be exported directly into LIMS, ERP, or QA systems through API integration. ![LabsCubed Portal - Stress, Strain, Force - Tensile Testing Data](https://labscubed.com/assets/img/resources/astm-d412/Data-Analysis-Tensile-Testing-ASTM-D412-LabsCubed.webp) ## Concluding Remarks ASTM D412 is an essential standard for evaluating the tensile behaviour of rubber and elastomers, offering detailed insights into material strength, stretchability, and durability. By following the method precisely (using the appropriate specimen type, equipment, and testing conditions), labs can collect reliable data that is critical for quality control, product development, and regulatory compliance. Automated systems like CubeOne enhance this process by eliminating variability from manual steps, improving repeatability, and accelerating testing workflows. Whether you're testing a single material or running high-throughput batches, CubeOne streamlines ASTM D412 compliance while delivering accurate, actionable results at scale. ## Automating ASTM D412 testing Automated ASTM D412 testing takes the manual handling out of rubber tensile testing. Elastomer results are especially sensitive to how each dumbbell is measured and clamped: a small thickness error or an off-centre grip shows up directly in tensile strength and elongation at break. With the [CubeOne automated rubber tensile testing machine](https://labscubed.com/rubber-testing), a technician loads up to 12 ASTM D412 or ISO 37 specimens at once. CubeOne measures each specimen's thickness, grips it, pulls it while a video extensometer tracks strain up to 1000% elongation, and saves the results automatically, test after test, without an operator standing by. The same machine also runs ASTM D624 tear tests (Die B and Die C). The result is repeatable D412 data across shifts and operators, a traceable record for every specimen, and hours of technician time back every week. [See the CubeOne automated rubber tester →](https://labscubed.com/rubber-testing) ## Looking to automate ASTM D412 tensile testing? Download the CubeOne brochure to discover how automation can help your lab save time on repetitive tasks, reduce data variations, and let your team focus on the work that really matters. Thank you! Your submission has been received! ![CubeOne Brochure - Download to Learn about CubeOne Rubber Tensile Testing Equipment](https://labscubed.com/assets/img/resources/astm-d412/cube_one_download_brochure_labscubed.webp) ## Frequently asked questions What is the difference between ASTM D412 and ISO 37? Both evaluate the stress-strain behavior of vulcanized rubber and thermoplastic elastomers. ASTM D412 is the primary method in North America; ISO 37 follows a similar approach and is more widely used in Europe and other regions. They use different test speeds and specimen dimensions, but serve the same purpose. Choosing between them depends on whether your project or customer follows North American or international quality standards. What is the difference between Method A and Method B? Method A uses dogbone-shaped samples (6 types) and Method B is intended for ring-shaped specimens (2 types). Method A is the more commonly used and is the method supported by CubeOne. Dogbones are gripped in flat jaws and concentrate stress in the gauge area; rings are gripped on rollers or mandrels and distribute stress uniformly, which suits O-rings and gaskets. Which properties does ASTM D412 report? Tensile strength, tensile stress at a given elongation (modulus), ultimate elongation, tensile set, and the full stress-strain curve. For highly elastic materials the test may not reach fracture, in which case the focus shifts to elongation and recovery characteristics. Does CubeOne support all extensometer types? CubeOne supports two of the three: video extensometer and crosshead displacement. An automated physical extensometer is not available on CubeOne. What test conditions need to be controlled? Temperature, humidity, and testing speed can all affect results and should be controlled. Specimen preparation matters too: dogbones are typically die-cut from molded sheets or plaques, and should be cut so their length runs parallel to the extrusion grain direction. ## Related resources [Standard guide ASTM D638 / ISO 527-2 plastic tensile testing The plastics counterpart to D412 — specimen geometries, equipment, and how CubeTen automates them.](https://labscubed.com/resources/astm-d638-iso-527-2-plastic-tensile-testing)[Product CubeOne automated rubber tensile testing Up to 12 elastomer specimens loaded once, measured, gripped, and pulled unattended.](https://labscubed.com/rubber-testing)[Data The LabsCubed Portal Interactive stress-strain visualization, batch statistics, specimen-level traceability, CSV/PDF and API export.](https://labscubed.com/get-a-quote) ## Building the Autonomous Tensile Lab. We build the automated systems that bring true autonomy to tensile testing. Remove repetitive manual work from your workflows and empower your lab to run around the clock with precision. [Get a Quote](https://labscubed.com/get-a-quote) ![LabsCubed](https://labscubed.com/assets/img/logo.webp) Company [Home](https://labscubed.com/) [Rubber Testing](https://labscubed.com/rubber-testing) [Plastic Testing](https://labscubed.com/plastic-testing) Help [FAQs](https://labscubed.com/#faqs) [Get a Quote](https://labscubed.com/get-a-quote) Access [Request Demo](https://labscubed.com/get-a-quote) [Privacy Policy](https://labscubed.com/privacy-policy) Contact [info@labscubed.com](mailto:info@labscubed.com) [(519) 749-0460](tel:+15197490460) Kitchener, ON © 2026 LabsCubed Inc. All rights reserved.